Are tinted windows on cars approved?

Approved tinted windows: what does the law say?

Do you want to avoid the sweltering heat in your car in the middle of summer? Do you want more privacy or a more assertive style for your titine? Then tinted film is clearly your ally! But when the time comes to install it, an important question arises: are tinted windows really approved? We explain everything.

Variance Auto tinted windows

At Variance Autowe know that the regulations surrounding tinted windows may seem a little vague... but don't worry, we're here to guide you!

All our tinted film kits are approved and comply with current legislation. It's simple: if a product doesn't comply with regulations, it's clearly indicated on the product sheet!
What's more, you'll automatically receive a certificate of approval with your kit, so you'll have proof at hand in case of an inspection.

🔎 A quick reminder of the law: since January 2017, front windows must let in at least 70% of light (TLV or Visible Light Transmission). If they don't, they're forbidden.

Basically: if you choose a tinted film from Variance Auto, you can go ahead with your eyes closed - it's approved and safe for roadworthiness testing 😉

Variance Auto approved tinted glass installation: fast and efficient

Do you want to apply a tinted film yourself for the pleasure of "I did it myself"? Top! Here are our tips for a clean, long-lasting installation.

Before you start

Ideally, set up in an enclosed, clean, well-lit space, sheltered from the wind and between 10 and 25°C. It makes all the difference!

Step 1: Cleaning the windows

Spray both sides of the glass withsoapy water;
Use thesponge on the scraper side to remove all impurities;
Wipe thoroughly with a soft microfiber cloth or chamois;
Finish with a wiping pad for a perfect clean.

Step 2: Installing the tinted film

Peel off the protective film with two pieces of scotch tape;
Spray glue and glass with soap solution;
Position the film against the glass;
Tap from the center to the edges to remove air and bubbles;
Lower the glass a few centimetres to adjust the film.

Step 3: Finishing

Wrap a squeegee in an absorbent cloth;
Press firmly from the center outwards to secure the film.

And there you have it! Clean, discreet, professional and, above all, approved!

Tinted windows are fully approved if they comply with current regulations, and at Variance Auto, we'll make sure you do. You now have all you need to install your tinted film kit with complete peace of mind!

Need some advice or a helping hand choosing your kit? Go to our customer service department, we're responsive and friendly 😉