How to perfectly remove a wrapping car?

By heating the film on wrapping auto, you can avoid tedious removal of the film and/or adhesive residues. For this reason, using a heat gun will enable you to heat your wrapping auto consistently, and at the right temperature. The right temperature is around 65°C. To avoid overheating and thus burning your wrapping film, the correct movement is back and forth.

By the end of this stage, the wrapping film is more malleable and ready for total removal.

For easy application, use a mini-grater and concentrate on one edge of wrapping at a time. The aim is to gently peel off the film from wrapping. Once you've pulled off enough film, you'll have a better grip, and you'll be able to pull the wrapping at around 45°.

45° is the right angle to allow you to heat the film from both sides: top and bottom. While heating the film, remove it with sufficiently strong pressure. The most important element in this step is to maintain the same force while heating and removing the film from wrapping auto. By doing so, you'll prevent the film from crumbling and falling to shreds.

Congratulations, you've just applied your wrapping film perfectly! Now that the hard part's over, all you have to do is clean your car.

This is your last step! If any adhesive residues or traces remain on your bodywork after applying the wrapping film, simply clean it. Nothing is more effective than anisopropyl alcohol solution. It cleans your body thoroughly without damaging it. 

Depending on the quality of the wrapping film, its lifespan varies. At Variance Autoit's between 5 and 7 years. It depends on the vehicle'senvironment (weather, impacts, accidents), but also on its maintenance. For this reason, we do not recommend roller washing. These factors can damage the wrapping film, making it more difficult to remove. What's more, if your wrapping film has been installed for more than 10 years, there's a good chance that it will crumble during removal. In this case, we recommend that you call in a professional.

When it comes to removing a wrapping car, you need the right equipment. Having the right equipment will save you time and make removal easier. At Variance Auto, we're committed to helping you remove wrapping film, which is why we offer a range of removal equipment. These include : 

• Isopropyl alcohol to clean bodywork after removal; 
• A cloth to soak in isopropyl alcohol;
• A heat gun to heat the film of wrapping auto;
• A scraper blade for easy removal.

In addition to the accessories you'll need to remove the film from your wrapping car, we've put a number of videos at your disposal. There's nothing more effective than reading this article and watching a video tutorial to help you apply your wrapping auto film in the best possible conditions.