Right side warning tape - Class B approved - TPESC B 14303

Concerning the vehicles of building sites and interventions it is obligatory and essential to dress them with bands of beaconing for utility approved by the French law! For that, Variance Auto accompanies you with a choice of 2 types of stickers of marking, here, you will find the class B which is addressed to the vehicles of building sites and interventions which circulate at high speed (from 90 to 130km/h) and which wishes a retroreflective visibility being able to go until 500 meters of day like night!

This reflective right-side marker tape is available in rolls of up to 50 linear meters in widths of 14 cm or 28 cm. Don't hesitate to contact our advisors if you have any questions!

To discover the details of the class A safety markings, go to the product sheet of the: class B markings kit.

As a reminder, according to French law, you must respect certain installation rules concerning the application of these vehicle marking strips:

• Front: 2 utility strips are required, with a minimum area of 0.16m², hatching outwards on either side of the centre of the bonnet.
• Rear: 2 vertical stripes + 2 horizontal stripes of minimum 0.32m².
• Sides: 1 strip on each side of minimum 0.16m².

Please note that the crosshatching of the reflective strips on the right hand side should always be oriented in this way: the diagonals run downwards from the inside to the outside right.

Drive safe and approved with our range of marking films specially designed for emergency and response vehicles. Choose from 14 or 28 centimetre wide, right or left hand side marker tape. We also provide you with everything you need to successfully apply your marking tape in accordance with the law. Our retroreflective marker films are easy to apply and comply with safety standards!