Left side vehicle marker - Class A approved - TPESC A 3117

With its Class A approval - TPESC A 3117, this 14cm-wide left-side marking strip offers maximum safety on the road and on the carriageway. Generally speaking, Class A marker tape is intended for construction and intervention vehicles traveling at medium speeds (no more than 90km/h), and requiring visibility of up to 100 meters.

This left-side reflective marking tape is available as a cut-to-length roll up to 45 linear meters long and 7 cm wide. Please visit our other product pages if you'd rather order a different width of marking tape. Don't hesitate to contact our advisors if you have any questions!

Recommendations:

As a reminder, according to French law, you must respect certain installation rules concerning the application of these vehicle marking strips:

• Front: 2 strips of utility lighting are required, with a minimum surface area of 0.16m², hatching outwards on either side of the center of the hood;
• Rear: 2 vertical stripes + 2 horizontal stripes of minimum 0.32m² ;
• Sides: 1 strip on each side of 0.16m² minimum.

Note that the crosshatching of the reflective stripes on the left-hand side should always be oriented in this way (looking at them horizontally): the diagonals run upwards from the right to the left.

To see for yourself how our product will look on your vehicle, order a free sample.

Référence produit : BALG6304.