Top of the page

3D matt black carbon wrapping film

152 cm

Add 4.5 ml and benefit from -3%.

47,33 or € then 2 x

Payment in 3x1st monthly payment today

followed by 2 monthly payments
for a total of : Of which expenses

Detailed description

Tinted film for your car: a real improvement in comfort

Much less expensive than real carbon, 3D matte black carbonwrapping is a highly realistic imitation. It perfectly reproduces the details of this exceptional material, highly prized by car enthusiasts. By covering parts such as the roof, hood or rear-view mirrors, you can transform your car or motorcycle to guaranteed effect with carbon-effect wrapping . The texture and design of black carbon vinyl create different lighting effects on your bodywork, just like real carbon. Like real carbon, its lines can be slightly irregular.

This film wrapping carbon cast 3D has an excellent dimensional stability to ensure a quality result. Thanks to its resistance to UV and humidity, the wrapping carbon effect has a durability of 7 to 10 years outdoors. Moreover, the rolls of wrapping carbon are 1.52 m wide, so you can equip your car part in one piece without cutting or fitting.

Vinyl is a cast PVC which means that it can be thermoformed to fit the shape of the areas to be covered. It is suitable for flat and non-flat surfaces. Its micro-channel structured adhesive allows air bubbles to be easily evacuated and avoids installation defects. It is a semi-definitive solution. You can remove your wrapping car at any time without leaving any trace on the original paint.

Important note: choose between a wrapping 2D or 3D ?

As a reminder, this film from wrapping has a 3D finish, which means that it is thermoformable. It is therefore sensitive to heat (heat gun or hair dryer), it is recommended in the installation of wrapping on any type of surface, flat to very curved! It is thus privileged for a total wrapping but also on partial wrapping like mirrors for example. Any doubt? Do not hesitate to contact our team for more information!

This black 3D carbon wrapping from Variance Auto is made in Belgium.

Référence produit : carbon4903a.

See more details
  • Texture
    Carbon
  • Range
    3D (thermoformable)
  • Colour
    Black
  • Outdoor Durability
    7 to 10 years
  • Film
    Cadium-free multi-layer cast PVC
  • Uv Resistance
    yes
  • Adhesive
    Air Escape Permanent Clear Acrylic
  • Moisture Resistance
    yes
  • Thickness
    145 µ
  • Application Temperature
    From +5°C to +40°C
  • Elongation
    > 100%
  • Operating Temperature
    From -20°C to +100°C
  • Flammability
    self-extinguishing film if applied to aluminium, glass, steel
  • Type Of Installation
    Dry
  • Removal
    Easy without leaving a trace
See all Data sheet

Each computer/telephone screen has a different calibration, so there may be a difference in color and/or texture.
If in doubt, please contact our customer service department or request a free sample (limited to 3 references).

Tuto: need help with installation?

Tinted films tailored to your car: how does it work?

Tools for easy installation

Whatever your project, the application tools and accessories offered by Luminis Films will be invaluable to the success of your application! Adhesive films, electrostatic films, decorative coatings... each product has its own associated application equipment. Thanks to these accessories, you can install your Luminis Films film or coating yourself, and get a clean, precise result by following our installation tutorials!

First, select the make and model of the vehicle you wish to equip with tinted windows. Tinted films are available for Audi, BMW, Renault, Nissan, Toyota and many other makes: over 4,500 vehicles!

Then choose the tint for your car's front and rear windows. You can choose from several ranges and tints to suit your needs. We also offer a wide range of tints, from the lightest to the darkest, to suit your every need. Premium, Essential, Security or Color: choose the finish of your choice for your tinted car film!

Finally, place your order and receive your custom-cut, thermoformed tinted kit for your car. The tinted films are cut to the exact dimensions of your windows, so you don't have to make any cuts. The bonus? The films are thermoformed beforehand to adapt perfectly to the curves of your car.

Our aim? To offer you easy-to-install tinted film kits that will save you money. You won't need to go to a garage, where labor is sometimes too expensive: install your tinted window kit yourself!

Highlights

  • Finish: 3D thermoformable
  • Appearance: black carbon
  • Type of glue: airflow

Opinions of our customers

  • *****

    Il y a 685 jours

    Very good good products

  • *****

    Il y a 1099 jours

    Very good quantity

  • *****

    Il y a 1156 jours

    Very nice carbon, perfect to rebuild some parts of my bike

  • *****

    Il y a 1227 jours

    Great rendering on my wife's bike

  • *****

    Il y a 447 jours

    Very good good quality

  • *****

    Il y a 1219 jours

    The price of the "made to measure" being a little too high in 3D CARBON (4903a) I took the time to make sure that the roof of my PANDA was relatively flat and therefore that I could limit myself to 2D (4803). In this case, I have what I need in the standard widths and lengths. As a result, the price "drops" from 175 € to 65 €. THANK YOU FOR YOUR ADVICE. I will contact you again when I install it to discuss the possible problems and the tips I have found.

  • *****

    Il y a 1252 jours

    My first wrapping, so I can't compare it to 3M, for example, but the vinyl seems to be of good quality and relatively easy to install.

  • *****

    Il y a 226 jours

    I thought it would be easier to install, but the frame of my motorcycle is quite curved, so folding it up was complicated, and there were a few creases.

    Comment Variance Auto - 2025/02/17

    Hello, Thank you for your feedback. The more curved the substrate, the more difficult it will be to apply. We advise you to heat the film well beforehand to make it more malleable and thus easier to apply. Best regards, The Variance Auto team

  • *****

    Il y a 685 jours

    Very fragile! brittle, I do not recommend this film if there are curves.

    Comment Variance Auto - 2023/11/15

    Hello, The part number you ordered is designed to be applied to curved surfaces. Be sure to thermoform the film with a heat gun so that it takes the shape you want. Sincerely, the Team Variance Auto

  • *****

    Il y a 844 jours

    Hello the carbon cover seems to be of good quality, unfortunately I received
    My order with a flaw in the film.
    As a result, a large part of the cover is unusable.
    Yet the package was well packaged, I guess the problem occurred before sending.
    I should have taken a picture but being very disappointed () this part went in the trash.

See more reviews

What the law says about film wrapping

Unlike when you have your car repainted in a different color from the original, car wrapping doesn't require any administrative formalities, as the change is temporary. So you're free to customize your car as you like, all over the body!

See more details

Frequently asked questions

  • What is the difference between wrapping 2D and wrapping 3D when choosing my wrapping ?


    wrapping 2D are suitable for flat or slightly curved surfaces. A good choice for making strips or stickers on a roof, for example.


    wrapping 3D are ideal for larger surfaces and more complex curved areas. Thanks to their "cast PVC" composition, they are more easily thermoformed. A wise choice for a complete wrapping , or mirrors, for example.


    For more information, see our article on wrapping 2D and 3D. 😉


  • How to install wrapping yourself?


    The first few times can be a bit technical if you're not used to it. With patience, precision, the right equipment and by following the installation instructions carefully, you can get the hang of it. 💪


    We advise you to start with "simple" parts like a hood or a roof, to get the hang of it. After that, the more you lay, the easier it gets! 👌


    We've got plenty of tutorials to teach you how to lay it yourself. Discover our tips and tricks in this article.


  • How to wash a car with a wrapping ?


    Parts covered with wrapping can be maintained in the same way as the rest of the vehicle. All you need to do is take care of the cut-outs and joints: we advise against washing with a roller to avoid delamination.


    Also watch out for karchers at joints. Allow for sufficiently wide returns during installation, to avoid the risk of delamination during cleaning.


    Discover our video on how to maintain your wrapping, by clicking here!


  • What's the best movie wrapping ?


    It's the one that's right for you! For stickers or flat surfaces, a wrapping 2D is ideal. On the other hand, for a total wrapping or rear-view mirrors, installation will be easier with a wrapping 3D.


    You can also treat yourself to a wrapping from Avery Dennison or 3M. In any case, at Variance Auto we only offer carefully selected, professional-quality products.


  • How much wrapping do I need to cover my vehicle completely?


    The wrapping total calculator shows in just a few clicks the number of linear meters you need for the complete wrapping of your car.


    If your car is not entered in the calculator :

    1. Measure the length of the car (from the bottom of the front bumper through the roof to the bottom of the rear bumper).
    2. Multiply this result by 3.


    If you're not sure, please contact our sales advisors, who will be able to answer your questions as quickly as possible!


  • What's the difference between wrapping and paint?


    wrapping is a great alternative to paint.


    • wrapping can be installed by yourself thanks to our installation tutorials.
    • The wrapping protects the original paintwork, keeping it in good condition.
    • The wrapping can be removed at any time
    • wrapping is less expensive


    Good to know: The wrapping film will adapt to the surface. If there are bumps or pokes, the wrapping will conform to the shape. These imperfections will remain visible. What's more, if the original paintwork is damaged, the wrapping film can damage it on removal.


  • Is it possible to remove a wrapping ?


    Yes, you can remove it at any time without leaving any marks on your vehicle's bodywork. The adhesive used is specially designed so that you can restore the original bodywork at any time.


    Warning: wrapping will not damage paint on paint in good condition. But if you put a wrapping on paint that is starting to flake or become damaged, it can damage it. 


  • Which wrapping to choose for a complete car?

    The wrapping 3D.


    It offers superior elasticity and stretchability to 2D, ensuring a smooth, wrinkle-free finish on your vehicle's most complex shapes. wrapping 2D is ideal if you're working on flat surfaces, without curves or reliefs. It's perfect for roofs or hood stripes, for example.

    For an estimate of the quantity needed for your complete wrapping , use our calculator!

See more questions
Preparing an order in the workshop

Made to order in our workshop in France

Our products are printed and cut in our workshop in Villars-les-Dombes. We offer exclusive collections with designs created and printed in our studio. Every product ordered on our website is made to the customer's measurements, with no possibility of retraction. Perceived color may vary from screen to screen. Before ordering, test our free samples! And avoid being dissatisfied or making a mistake 😉
Ask for your free samples!

Your sample list
Free samples are limited to 3 references
-

No reference selected.
To select new samples, go to the product pages.

See my selection of samples

Samples

Votre kit film teintésfilm teinté Audi, film teinté Volkswagen, film teinté Peugeot, film teinté Renault, film teinté Seat, film teinté Citroën, film teinté BMW

Votre kit vitres teintées - vitres teintées Audi, vitres teintées Volkswagen, vitres teintées Peugeot, vitres teintées Renault, vitres teintées Seat, vitres teintées Citroën, vitres teintées BMW