Approved reflective strips on left side - standard TPESC-B-13223

Due to their urgent nature, emergency vehicles are sometimes required to travel at high speed and to stop in unlikely or even dangerous places. To ensure the safety of the occupants but also of passers-by and other drivers, the affixing of approved safety markings is mandatory by French law.

These reflective stripes Variance Auto totally respect the homologation foreseen by the French law and will be easily applied on all your concerned vehicles.

This reflective left-side marker sticker is available in rolls that can be cut to a length of 50 linear meters and a width of 14 cm or 28 cm. Don't hesitate to contact our advisors if you have any questions!

Their long durability of up to 7 years and their resistance make them an effective and much sought after product. You can now drive with peace of mind and safety thanks to the reflective strips of this adhesive vehicle marking which are visible up to several hundred metres away!

As a reminder, according to French law, you must respect certain installation rules concerning the application of these marker strips:

• Front: 2 reflective strips of adhesive vehicle marking are required, with a minimum area of 0.16m², hatching outwards on either side of the centre of the bonnet.
• Rear: 2 vertical stripes + 2 horizontal stripes of minimum 0.32m².
• Sides: 1 strip on each side of minimum 0.16m².

Please note that the crosshatching of the reflective stickers on the left side should always be oriented in this way: the diagonals run downwards from the inside to the outside left.

Product reference : BALG6306

Drive safe and approved with our range of marking films specially designed for emergency and response vehicles. Choose from 14 or 28 centimetre wide, right or left hand side marker tape. We also provide you with everything you need to successfully apply your marking tape in accordance with the law. Our retroreflective marker films are easy to apply and comply with safety standards!