Reflective strips approved on the right side - standard TPESC-B-113223

With its Class B approval - TPESC B 14303, this 28cm wide right-hand side marking strip offers maximum safety on the road and on the carriageway. In general, Class B marker tape is designed for construction and intervention vehicles traveling at high speeds ( 90 to 130km/h) and requiring retroreflective visibility of up to 500 meters, day and night.

This right-side reflective marker tape is available in rolls that can be cut to a length of 50 linear meters and a width of 7 cm. If you'd rather order a different width of reflective tape, please visit our other product pages. Don't hesitate to contact our advisors if you have any questions!

Recommendations:

As a reminder, according to French law, you must respect certain installation rules concerning the application of these vehicle marking strips:

• Front: 2 strips of utility lighting are required, with a minimum surface area of 0.16m², hatching outwards on either side of the center of the hood;
• Rear: 2 vertical stripes + 2 horizontal stripes of minimum 0.32m² ;
• Sides: 1 strip on each side of 0.16m² minimum.

Note that the hatching of the reflective stripes on the right-hand side should always be oriented in this way (looking at them horizontally): the diagonals run upwards from the left to the right.

To see for yourself how our product will look on your vehicle, order a free sample.

Référence produit : BALD630628.