Approved class A right-side marker film - standard TPESC-A-19112 - Roll: 0,45 m x 0,14 m

It's now essential for construction and emergency vehicles to be fitted with adhesive tapes approved by French law! For this purpose, Variance Auto offers you a choice of 2 types of adhesive reflective tape. Here, you'll find the Class A-approved marker sticker, designed for worksite and intervention vehicles traveling at medium speed (no more than 90km/h) and requiring visibility of up to 100 meters.

This right hand side marker sticker is available in rolls that can be cut to a length of 9 linear metres and a width of 14 cm or 28 cm. Do not hesitate to contact our advisers for any question on this subject!

To find out more about Class B marking tape, please visit the product sheet for: Class B approved marking kit.

As a reminder, according to French law, you must respect certain installation rules concerning the application of these adhesive reflective strips:

• Front: 2 adhesive reflective strips are required, with a minimum surface area of 0.16m², hatching outwards on either side of the centre of the bonnet.
• Rear: 2 vertical stripes + 2 horizontal stripes of minimum 0.32m².
• Sides: 1 strip on each side of minimum 0.16m².

Please note that the crosshatching of the reflective strips on the right hand side should always be oriented in this way: the diagonals run downwards from the inside to the outside right.