Top of the page

Left side vehicle marker - Class A approved - TPESC A 3117

  • Available
  • Product number : BAL-G6304-7

Made to order

7 cm

Add 4 ml and get-3% off

4,43 or € then 2 x

Highlights

  • Class A approved film left side - Width 7cm
  • Medium speed intervention vehicles
  • Strip visibility up to 100 metres
Read more
Payment in 3x1st monthly payment today

followed by 2 monthly payments
for a total of : Of which expenses

The commitments Variance Auto

  • Cut to size

  • Professional quality film

  • Careful packaging

  • Shipment within 24 hours

Detailed description

Tinted film for your car: a real improvement in comfort

With its class A approval - TPESC A 3117, this 7cm wide marking tape will offer you maximum safety on the road and on the pavement. In general, the class A marking is intended for construction and intervention vehicles that travel at medium speed (no more than 90km/h) and that want a visibility of up to 100 meters.

This left side reflective tape is available in rolls with a length of 45 linear meters and a width of 7 cm. If you would like to order a different width of marking tape, please visit our other product pages. Do not hesitate to contact our advisors for any question on this subject!

Recommendations:

  • Avoid positioning the warning tape on the very curved parts of the body.
  • Apply the marking film at least 5mm from the outer edges of the body.
  • Avoid overlapping two traffic stripes, prefer edge to edge.
  • In order for the glue to polymerize, we advise you not to wash the vehicle for 8 days following the installation of the strips and to leave it in a dry place at a temperature ideally higher than 10°c.
  • As a reminder, according to French law, you must respect certain installation rules concerning the application of these vehicle marking strips:

    • Front: 2 utility strips are required, with a minimum area of 0.16m², hatching outwards on either side of the centre of the bonnet.
    • Rear: 2 vertical stripes + 2 horizontal stripes of minimum 0.32m².
    • Sides: 1 strip on each side of minimum 0.16m².

    Note that the crosshatching of the reflective stripes on the left side must always be oriented in this way: the diagonals are descending and go from the inside to the outside left.

    Data sheet

    Concept : Cut-to-size marker film

    Drive safe and approved with our range of marking films specially designed for emergency and response vehicles. Choose from 14 or 28 centimetre wide, right or left hand side marker tape. We also provide you with everything you need to successfully apply your marking tape in accordance with the law. Our retroreflective marker films are easy to apply and comply with safety standards!

    Installation instructions

    Each computer/telephone screen has a different calibration, so there may be a difference in color and/or texture.
    If in doubt, please contact our customer service department or order a sample.

    The brand Variance Auto

    Variance Auto

    Variance Auto is specialized for more than 10 years in the manufacture of tinted window kits. We offer, among other things, pre-cut and thermoformed solar film made to measure. Variance Auto is above all a team of enthusiasts and experts in the world of cars, who will be able to answer your questions and offer you the product adapted to your needs for your tinted windows. In order to guarantee your satisfaction, we do our best to offer you professional quality products at the best price!

    Our bestsellers

    Our customers also liked

    You'll also like

    22 similar reference(s)

    Your sample list
    Free samples are limited to 3 references
    -

    No reference selected.
    To select new samples, go to the product pages.

    See my selection of samples

    Samples

    Your tinted window kit - Audi tinted windows, Volkswagen tinted windows, Peugeot tinted windows, Renault tinted windows, Seat tinted windows, Citroën tinted windows, BMW tinted windows