How to install Paint protection film ?
Guide
September 01, 2020
2020-09-01T08:00:00+08:00
2020-09-01T08:00:00+08:00
Paint protection film
Between door bangs, stone chips and other everyday scratches, it is sometimes difficult to protect your bodywork! To fight against this plague, we explain in this guide, how to correctly apply Paint protection film !
In only 4 steps, Variance Auto gives you all the keys to succeed correctly and easily the installation of your Paint protection film !
Having trouble removing the liner? Use 2 pieces of tape placed end to end in a corner and pull gently!
The board Variance Auto :
If you want to apply Paint protection film on a curved area, you can heat it slightly with a heat gun or hair dryer to soften it a bit so that it will fit the area perfectly.
- First and foremost, you must ensure that you thoroughly clean the surface where you want to install a Paint protection film.
- For the second step, you will only need to remove the paper liner that protects the Paint protection film before applying it.
Having trouble removing the liner? Use 2 pieces of tape placed end to end in a corner and pull gently!
- For small surfaces, you will just have to place directly your Paint protection film directly on the surface to be treated, then press from the center to the edges to eliminate bubbles.
The board Variance Auto :
If you want to apply Paint protection film on a curved area, you can heat it slightly with a heat gun or hair dryer to soften it a bit so that it will fit the area perfectly.
- For this last step, you can cut out the protruding parts with a cutter (be careful with the bodywork!) and finish by removing the second liner from Paint protection film.
Related products
* price per m² for the purchase of a full roll of the largest width.
In the same theme
Related products
* price per m² for the purchase of a full roll of the largest width.
