How do I apply a tinted car film?
You have already invested or you want to buy a tinted window kit for your car, but you have doubts about the application? Variance Auto guides you step by step through this guide, to help you in the best possible way in the application of your tinted films for car.
There are 3 main steps in the installation of tinted window films:
- The first is to clean your windows thoroughly before applying your tinted films.
To clean your windows, simply clean them with soapy water on both sides, then use the scrubbing side of the sponge to remove any dirt. Then wipe the windows and trim with a clean cloth and wipe off any remaining dust with a wipe pad: you are ready to start applying your car window tinting films!
- Once the protective film has been removed, we recommend that you wet the inside of your car window and the outside of the tinted film with plenty of soapy water.
For your side windows, we recommend the use ofseal spacers to facilitate the introduction of the tinted films. Do not hesitate to use a squeegee and to press the film as far as possible under the seal to avoid bubbles.
- Once your windows have been reassembled, you can move on to the finishing stage: wrap a clean cloth around the squeegee and hammer it down again to remove as much water as possible: don't hesitate to press down hard to make the special car tinted film stick!
After a drying time of about 2 days, you can now enjoy your beautiful tinted windows Variance Auto !
Feel free to watch our window tinting video tutorials to help you with your installation!
Related products
** unit price for the purchase of the largest lot offered.
* price per m² for the purchase of a full roll of the largest width.
Related products
** unit price for the purchase of the largest lot offered.
* price per m² for the purchase of a full roll of the largest width.